层次聚类

此词条暂由水流心不竞翻译，未经审校，带来阅读不便，请见谅。由CecileLi初步审校。翻译评级：B

"SLINK" redirects here. For the online magazine, see Slink.

In data mining and statistics, hierarchical clustering (also called hierarchical cluster analysis or HCA) is a method of cluster analysis which seeks to build a hierarchy of clusters. Strategies for hierarchical clustering generally fall into two types:

In data mining and statistics, hierarchical clustering (also called hierarchical cluster analysis or HCA) is a method of cluster analysis which seeks to build a hierarchy of clusters. Strategies for hierarchical clustering generally fall into two types:

在数据挖掘和统计学中， 层次聚类Hierarchical clustering(也被称为层次数据聚类或HCA)是一种数据聚类的方法，它旨在建立一个集群层次结构。 实现层次聚类Hierarchical clustering的方法通常有两种:

• Agglomerative: This is a "bottom-up" approach: each observation starts in its own cluster, and pairs of clusters are merged as one moves up the hierarchy.

补充翻译：凝聚聚类：这是一种“自上而下又自下而上/纵向”的方法：每个被观察数据从自己的簇类中开始，当一个观察组数据向上层移动时，成对的簇类集群被合并。

• Divisive: This is a "top-down" approach: all observations start in one cluster, and splits are performed recursively as one moves down the hierarchy.

补充翻译：分裂聚类：这是一种“自上而下”的方法：所有的被观察数据都从一个簇类集群中开始，当一个簇类向下移动时，整个观察组数据群会递归地执行分割。

In general, the merges and splits are determined in a greedy manner. The results of hierarchical clustering are usually presented in a dendrogram.

chapter=Chapter 8: Hierarchical Clustering | url=https://www.springer.com/gp/book/9783319219028 |chapter-url=https://www.researchgate.net/publication/314700681 }}</ref> are usually presented in a dendrogram.

正如在第八章: 层次聚类Hierarchical clustering | url = https://www.springer.com/gp/book/9783319219028 | Chapter-url = https://www.researchgate.net/publication/314700681} </ref > 中所言，通常在树状图中呈现。

The standard algorithm for hierarchical agglomerative clustering (HAC) has a time complexity of [math]\displaystyle{ \mathcal{O}(n^3) }[/math] and requires [math]\displaystyle{ \mathcal{O}(n^2) }[/math] memory, which makes it too slow for even medium data sets. However, for some special cases, optimal efficient agglomerative methods (of complexity [math]\displaystyle{ \mathcal{O}(n^2) }[/math]) are known: SLINK for single-linkage and CLINK for complete-linkage clustering. With a heap the runtime of the general case can be reduced to [math]\displaystyle{ \mathcal{O}(n^2 \log n) }[/math] at the cost of further increasing the memory requirements. In many cases, the memory overheads of this approach are too large to make it practically usable.

The standard algorithm for hierarchical agglomerative clustering (HAC) has a time complexity of [math]\displaystyle{ \mathcal{O}(n^3) }[/math] and requires [math]\displaystyle{ \mathcal{O}(n^2) }[/math] memory, which makes it too slow for even medium data sets. However, for some special cases, optimal efficient agglomerative methods (of complexity [math]\displaystyle{ \mathcal{O}(n^2) }[/math]) are known: SLINK for single-linkage and CLINK for complete-linkage clustering. With a heap the runtime of the general case can be reduced to [math]\displaystyle{ \mathcal{O}(n^2 \log n) }[/math] at the cost of further increasing the memory requirements. In many cases, the memory overheads of this approach are too large to make it practically usable.

层次凝聚聚类Hierarchical agglomerative clustering(HAC)的标准算法的时间复杂度为 < math > mathical { o }(n ^ 3) </math > ，并且需要 < math > mathcal { o }(n ^ 2) </math > 占用内存，这使得它对于中等数据集来说效率太低了。然而，对于某些特殊情况，已知的最佳有效凝聚方法(复杂度 < math > mathcal { o }(n ^ 2) </math >)是: 单连锁的 SLINK < ! ——粗体 wp: r # pla-- > 和完全连锁的 CLINK。对于数据群而言，一般情况下的运行时可以缩减为 < math > mathcal { o }(n ^ 2 log n) </math > ，代价是进一步增加内存需求。在多数情况下，这种方法的内存开销太大，并不实用。

Except for the special case of single-linkage, none of the algorithms (except exhaustive search in [math]\displaystyle{ \mathcal{O}(2^n) }[/math]) can be guaranteed to find the optimum solution.

Except for the special case of single-linkage, none of the algorithms (except exhaustive search in [math]\displaystyle{ \mathcal{O}(2^n) }[/math]) can be guaranteed to find the optimum solution.

除了单链路的特殊情况外，所有算法(除了 < math > mathcal { o }(2 ^ n) </math > 数学中的穷举搜索)都不能保证找到最优解。

Divisive clustering with an exhaustive search is [math]\displaystyle{ \mathcal{O}(2^n) }[/math], but it is common to use faster heuristics to choose splits, such as k-means.

Divisive clustering with an exhaustive search is [math]\displaystyle{ \mathcal{O}(2^n) }[/math], but it is common to use faster heuristics to choose splits, such as k-means.

穷举搜索的分裂群集是 < math > mathcal { o }(2 ^ n) </math > ，但是通常使用运算速度更快的探索法来选择分裂，比如 k-means。

Cluster dissimilarity 簇异性

In order to decide which clusters should be combined (for agglomerative), or where a cluster should be split (for divisive), a measure of dissimilarity between sets of observations is required. In most methods of hierarchical clustering, this is achieved by use of an appropriate metric (a measure of distance between pairs of observations), and a linkage criterion which specifies the dissimilarity of sets as a function of the pairwise distances of observations in the sets.

In order to decide which clusters should be combined (for agglomerative), or where a cluster should be split (for divisive), a measure of dissimilarity between sets of observations is required. In most methods of hierarchical clustering, this is achieved by use of an appropriate metric (a measure of distance between pairs of observations), and a linkage criterion which specifies the dissimilarity of sets as a function of the pairwise distances of observations in the sets.

为了决定哪些集群应该被组合起来(用于聚合) ，或者哪些集群应该被分离(用于分裂) ，需要在观察组之间进行不同程度的度量。在大多数层次聚类方法中，这是通过使用适当的度量(对观测值之间的距离度量)和联系准则来实现的，联系准则将集合的不同指定为观测值在集合中的成对距离的函数。

Metric 度量标准

The choice of an appropriate metric will influence the shape of the clusters, as some elements may be close to one another according to one distance and farther away according to another. For example, in a 2-dimensional space, the distance between the point (1,0) and the origin (0,0) is always 1 according to the usual norms, but the distance between the point (1,1) and the origin (0,0) can be 2 under Manhattan distance, [math]\displaystyle{ \scriptstyle\sqrt{2} }[/math] under Euclidean distance, or 1 under maximum distance.

The choice of an appropriate metric will influence the shape of the clusters, as some elements may be close to one another according to one distance and farther away according to another. For example, in a 2-dimensional space, the distance between the point (1,0) and the origin (0,0) is always 1 according to the usual norms, but the distance between the point (1,1) and the origin (0,0) can be 2 under Manhattan distance, [math]\displaystyle{ \scriptstyle\sqrt{2} }[/math] under Euclidean distance, or 1 under maximum distance.

度量方式的选择将影响数据簇类的形状，因为某些元素依据一个距离可能彼此接近，而依据另一个距离可能彼此远离。例如，在一个二维空间中，点(1,0)和原点(0,0)之间的距离通常是1，但是点(1,1)和原点(0,0)之间的距离在曼哈顿距离下可以是2，在欧几里得度量下可以是1，在最大距离下可以是1。

Some commonly used metrics for hierarchical clustering are:

Some commonly used metrics for hierarchical clustering are:

一些常用的 层次聚类Hierarchical clustering指标如下:

{ | class = “ wikitable”

Names	Names	名字	Formula	Formula	方程式
Euclidean distance	Euclidean distance	Euclidean distance	[math]\displaystyle{ \|a-b \|_2 = \sqrt{\sum_i (a_i-b_i)^2} }[/math]	[math]\displaystyle{ \|a-b \|_2 = \sqrt{\sum_i (a_i-b_i)^2} }[/math]	a-b | _ 2 = sqrt { sum _ i (a _ i-b _ i) ^ 2} </math >
Squared Euclidean distance	Squared Euclidean distance	Squared Euclidean distance	[math]\displaystyle{ \|a-b \|_2^2 = \sum_i (a_i-b_i)^2 }[/math]	[math]\displaystyle{ \|a-b \|_2^2 = \sum_i (a_i-b_i)^2 }[/math]	a-b | 2 ^ 2 = sum _ i (a _ i-b _ i) ^ 2
Manhattan distance	Manhattan distance	曼哈顿距离	[math]\displaystyle{ \|a-b \|_1 = \sum_i |a_i-b_i| }[/math]	[math]\displaystyle{ \|a-b \|_1 = \sum_i |a_i-b_i| }[/math] [数学][数学][数学]
Maximum distance	Maximum distance	最大距离	[math]\displaystyle{ \|a-b \|_\infty = \max_i |a_i-b_i| }[/math]	[math]\displaystyle{ \|a-b \|_\infty = \max_i |a_i-b_i| }[/math] [数学][数学][数学]
Mahalanobis distance	Mahalanobis distance 马氏距离	[math]\displaystyle{ \sqrt{(a-b)^{\top}S^{-1}(a-b)} }[/math] where S is the Covariance matrix	[math]\displaystyle{ \sqrt{(a-b)^{\top}S^{-1}(a-b)} }[/math] where S is the Covariance matrix	< math > sqrt {(a-b) ^ { top } s ^ {-1}(a-b)} </math > 其中 s 是协方差矩阵

|}

For text or other non-numeric data, metrics such as the Hamming distance or Levenshtein distance are often used.

For text or other non-numeric data, metrics such as the Hamming distance or Levenshtein distance are often used.

对于文本文字或其他非数字数据，常常使用汉明距离或莱文斯坦距离等度量标准。

A review of cluster analysis in health psychology research found that the most common distance measure in published studies in that research area is the Euclidean distance or the squared Euclidean distance.

A review of cluster analysis in health psychology research found that the most common distance measure in published studies in that research area is the Euclidean distance or the squared Euclidean distance.

通过对数据聚类健康心理学研究的回顾发现，在该研究领域已发表的研究中，最常见的距离测量方法是欧几里得度量距离或欧几里得度量距离的平方。

Linkage criteria 连接准则

The linkage criterion determines the distance between sets of observations as a function of the pairwise distances between observations.

The linkage criterion determines the distance between sets of observations as a function of the pairwise distances between observations.

链接准则决定了观测值之间的距离，它是观测值之间成对距离的函数。

Some commonly used linkage criteria between two sets of observations A and B are:

Some commonly used linkage criteria between two sets of observations A and B are:

两组观测值 a 和 b 之间一些常用的联系标准如下:

{ | class = “ wikitable”

Names	Names	名字	Formula	Formula	方程式
Maximum or complete-linkage clustering	Maximum or complete-linkage clustering	最大或完全链接群集	[math]\displaystyle{ \max \, \{\, d(a,b) : a \in A,\, b \in B \,\}. }[/math]	[math]\displaystyle{ \max \, \{\, d(a,b) : a \in A,\, b \in B \,\}. }[/math]	< math > max，{ ，d (a，b) : a 在 a，b 在 b，}。数学
Minimum or single-linkage clustering	Minimum or single-linkage clustering	最小或单链接群集	[math]\displaystyle{ \min \, \{\, d(a,b) : a \in A,\, b \in B \,\}. }[/math]	[math]\displaystyle{ \min \, \{\, d(a,b) : a \in A,\, b \in B \,\}. }[/math]	< math > min，{ ，d (a，b) : a in a，，b in b，}.数学
Unweighted average linkage clustering (or UPGMA)	Unweighted average linkage clustering (or UPGMA)	Unweighted average linkage clustering (或 UPGMA)	[math]\displaystyle{ \frac{1}{|A|\cdot|B|} \sum_{a \in A }\sum_{ b \in B} d(a,b). }[/math]	[math]\displaystyle{ \frac{1}{|A|\cdot|B|} \sum_{a \in A }\sum_{ b \in B} d(a,b). }[/math]	a | cdot | b | } sum _ { a } sum _ { b } d (a，b).数学
Weighted average linkage clustering (or WPGMA)	Weighted average linkage clustering (or WPGMA)	加权平均数链接聚类(或 WPGMA)	[math]\displaystyle{ d(i \cup j, k) = \frac{d(i, k) + d(j, k)}{2}. }[/math]	[math]\displaystyle{ d(i \cup j, k) = \frac{d(i, k) + d(j, k)}{2}. }[/math]	< math > d (i cup j，k) = frac { d (i，k) + d (j，k)}{2}.数学
Centroid linkage clustering, or UPGMC	Centroid linkage clustering, or UPGMC	质心链接集群，或 UPGMC	[math]\displaystyle{ \|c_s - c_t \| }[/math] where [math]\displaystyle{ c_s }[/math] and [math]\displaystyle{ c_t }[/math] are the centroids of clusters s and t, respectively.	[math]\displaystyle{ \|c_s - c_t \| }[/math] where [math]\displaystyle{ c_s }[/math] and [math]\displaystyle{ c_t }[/math] are the centroids of clusters s and t, respectively.	c _ s-c _ t | </math > 其中 < math > c _ s </math > 和 < math > c _ t </math > 分别是集群 s 和 t 的中心。
Minimum energy clustering	Minimum energy clustering	最小能量聚类	[math]\displaystyle{ \frac {2}{nm}\sum_{i,j=1}^{n,m} \|a_i- b_j\|_2 - \frac {1}{n^2}\sum_{i,j=1}^{n} \|a_i-a_j\|_2 - \frac{1}{m^2}\sum_{i,j=1}^{m} \|b_i-b_j\|_2 }[/math]	[math]\displaystyle{ \frac {2}{nm}\sum_{i,j=1}^{n,m} \|a_i- b_j\|_2 - \frac {1}{n^2}\sum_{i,j=1}^{n} \|a_i-a_j\|_2 - \frac{1}{m^2}\sum_{i,j=1}^{m} \|b_i-b_j\|_2 }[/math]	a _ i-b _ j | 2-frac {1}{ n ^ 2} sum { i，j = 1}{ n } | a _ i-a _ j | 2-frac {1}{ m ^ 2} sum { i，j = 1 ^ { m } | b _ i-b _ j | 2 </math >

|}

where d is the chosen metric. Other linkage criteria include:

where d is the chosen metric. Other linkage criteria include:

其中 d 是选定的度量单位。其他联系准则包括:

此处后准则无翻译

• The sum of all intra-cluster variance.

补充翻译 所有簇内方差之和。

• The increase in variance for the cluster being merged (Ward's criterion).

}}</ref>

} </ref >

• The probability that candidate clusters spawn from the same distribution function (V-linkage).

补充翻译 候选数据群从同一分布函数（V-连锁）中产生的概率。

• The product of in-degree and out-degree on a k-nearest-neighbour graph (graph degree linkage).

补充翻译 *k-最近邻图（图度连锁）上的入度与出度的乘积

• The increment of some cluster descriptor (i.e., a quantity defined for measuring the quality of a cluster) after merging two clusters.

补充翻译 在合并了两个数据群之后，某个群的定义符号（即为度量一个簇的质量而定义的一个量）的增量。

Discussion 讨论

Hierarchical clustering has the distinct advantage that any valid measure of distance can be used. In fact, the observations themselves are not required: all that is used is a matrix of distances.

Hierarchical clustering has the distinct advantage that any valid measure of distance can be used. In fact, the observations themselves are not required: all that is used is a matrix of distances.

层次聚类Hierarchical clustering具有明显的优势，它可以使用任何有效的距离度量。事实上，观测本身也并不是必需的，层次聚类所需要用的只是一个距离矩阵。

Agglomerative clustering example 凝聚聚类实例

Raw data

Raw data

原始数据

For example, suppose this data is to be clustered, and the Euclidean distance is the distance metric.

For example, suppose this data is to be clustered, and the Euclidean distance is the distance metric.

例如，假设要对这些数据进行聚类，欧几里得距离就是距离度量。

The hierarchical clustering dendrogram would be as such:

The hierarchical clustering dendrogram would be as such:

系统聚类树状图如下:

Traditional representation

Traditional representation

传统展现法

Cutting the tree at a given height will give a partitioning clustering at a selected precision. In this example, cutting after the second row (from the top) of the dendrogram will yield clusters {a} {b c} {d e} {f}. Cutting after the third row will yield clusters {a} {b c} {d e f}, which is a coarser clustering, with a smaller number but larger clusters.

Cutting the tree at a given height will give a partitioning clustering at a selected precision. In this example, cutting after the second row (from the top) of the dendrogram will yield clusters {a} {b c} {d e} {f}. Cutting after the third row will yield clusters {a} {b c} {d e f}, which is a coarser clustering, with a smaller number but larger clusters.

在给定的高度切割树状图中，将以选定的精度提供分区聚类。在这个示例中，在树状图的第二行(从顶部开始)之后切割将产生集群{ a }{ b }{ d }{ f }。在第三行之后进行切割将产生集群{ a }{ b }{ d e f } ，这是一个较为粗略的但元素更繁多的集群，然而它的数量也较小。

This method builds the hierarchy from the individual elements by progressively merging clusters. In our example, we have six elements {a} {b} {c} {d} {e} and {f}. The first step is to determine which elements to merge in a cluster. Usually, we want to take the two closest elements, according to the chosen distance.

This method builds the hierarchy from the individual elements by progressively merging clusters. In our example, we have six elements {a} {b} {c} {d} {e} and {f}. The first step is to determine which elements to merge in a cluster. Usually, we want to take the two closest elements, according to the chosen distance.

此方法通过逐步合并集群，从单个元素构建层次结构。在我们的示例中，有六个元素{ a }{ b }{ c }{ d }{ e }和{ f }。第一步是确定在集群中合并哪些元素。通常，我们希望根据选定的距离获取两个最接近的元素。

Optionally, one can also construct a distance matrix at this stage, where the number in the i-th row j-th column is the distance between the i-th and j-th elements. Then, as clustering progresses, rows and columns are merged as the clusters are merged and the distances updated. This is a common way to implement this type of clustering, and has the benefit of caching distances between clusters. A simple agglomerative clustering algorithm is described in the single-linkage clustering page; it can easily be adapted to different types of linkage (see below).

Optionally, one can also construct a distance matrix at this stage, where the number in the i-th row j-th column is the distance between the i-th and j-th elements. Then, as clustering progresses, rows and columns are merged as the clusters are merged and the distances updated. This is a common way to implement this type of clustering, and has the benefit of caching distances between clusters. A simple agglomerative clustering algorithm is described in the single-linkage clustering page; it can easily be adapted to different types of linkage (see below).

还可以选择在这个阶段构造一个距离矩阵，其中第i行第j列中的数字是i和j，即为两个元素之间的距离。然后，随着集群的进展，在合并集群和更新距离时合并行和列。这是实现此类集群的常用方法，并且具有缓存集群之间的距离的优点。在单链接聚类页面中描述了一个简单的凝聚聚类算法; 它适用于很多链接(见下文)。

Suppose we have merged the two closest elements b and c, we now have the following clusters {a}, {b, c}, {d}, {e} and {f}, and want to merge them further. To do that, we need to take the distance between {a} and {b c}, and therefore define the distance between two clusters.

Suppose we have merged the two closest elements b and c, we now have the following clusters {a}, {b, c}, {d}, {e} and {f}, and want to merge them further. To do that, we need to take the distance between {a} and {b c}, and therefore define the distance between two clusters.

假设我们已经合并了两个最接近的元素 b 和 c，现在我们有以下集群{ a }、{ b、 c }、{ d }、{ e }和{ f } ，并希望进一步合并它们。为此，我们需要计算{ a }和{ b c }之间的距离，从而定义两个集群之间的距离。

Usually the distance between two clusters [math]\displaystyle{ \mathcal{A} }[/math] and [math]\displaystyle{ \mathcal{B} }[/math] is one of the following:

Usually the distance between two clusters [math]\displaystyle{ \mathcal{A} }[/math] and [math]\displaystyle{ \mathcal{B} }[/math] is one of the following:

通常情况下，两组数字之间的距离是下列数字之一:

• The maximum distance between elements of each cluster (also called complete-linkage clustering):
• 每个集群元素之间的最大距离（又名完全链路集)

[math]\displaystyle{ \max \{\, d(x,y) : x \in \mathcal{A},\, y \in \mathcal{B}\,\}. }[/math]

[math]\displaystyle{ \max \{\, d(x,y) : x \in \mathcal{A},\, y \in \mathcal{B}\,\}. }[/math]

< math > max { ，d (x，y) : x in mathcal { a } ，，y in mathcal { b } ，}.数学

• The minimum distance between elements of each cluster (also called single-linkage clustering):
• 每个集群的元素之间的最小距离（也称为单个链路集):

[math]\displaystyle{ \min \{\, d(x,y) : x \in \mathcal{A},\, y \in \mathcal{B} \,\}. }[/math]

[math]\displaystyle{ \min \{\, d(x,y) : x \in \mathcal{A},\, y \in \mathcal{B} \,\}. }[/math]

< math > min { ，d (x，y) : x in mathcal { a } ，，y in mathcal { b } ，}.数学

• The mean distance between elements of each cluster (also called average linkage clustering, used e.g. in UPGMA):
• 每个簇元素之间的平均距离（也称为平均链路集）：

[math]\displaystyle{ {1 \over {|\mathcal{A}|\cdot|\mathcal{B}|}}\sum_{x \in \mathcal{A}}\sum_{ y \in \mathcal{B}} d(x,y). }[/math]

[math]\displaystyle{ {1 \over {|\mathcal{A}|\cdot|\mathcal{B}|}}\sum_{x \in \mathcal{A}}\sum_{ y \in \mathcal{B}} d(x,y). }[/math]

{1 over { | mathcal { a } | cdot | mathcal { b } | } sum { x in mathcal { a } sum { y in mathcal { b } d (x，y)).数学

• The sum of all intra-cluster variance.
• 所有集群内方差之和。
• The increase in variance for the cluster being merged (Ward's method)
• 合并的聚类的方差增加(离差平方和法)。
• The probability that candidate clusters spawn from the same distribution function (V-linkage).
• 候选集群从相同的分布函数中产生的概率（V—链路）。

In case of tied minimum distances, a pair is randomly chosen, thus being able to generate several structurally different dendrograms. Alternatively, all tied pairs may be joined at the same time, generating a unique dendrogram.

In case of tied minimum distances, a pair is randomly chosen, thus being able to generate several structurally different dendrograms. Alternatively, all tied pairs may be joined at the same time, generating a unique dendrogram.

在系结最小距离的情况下，一对元素是随机选择的，因此能够产生几个结构不同的树状图。或者，所有的绑定对可以在同一时间结合，产生一个唯一的树状图。

One can always decide to stop clustering when there is a sufficiently small number of clusters (number criterion). Some linkages may also guarantee that agglomeration occurs at a greater distance between clusters than the previous agglomeration, and then one can stop clustering when the clusters are too far apart to be merged (distance criterion). However, this is not the case of, e.g., the centroid linkage where the so-called reversals (inversions, departures from ultrametricity) may occur.

One can always decide to stop clustering when there is a sufficiently small number of clusters (number criterion). Some linkages may also guarantee that agglomeration occurs at a greater distance between clusters than the previous agglomeration, and then one can stop clustering when the clusters are too far apart to be merged (distance criterion). However, this is not the case of, e.g., the centroid linkage where the so-called reversals (inversions, departures from ultrametricity) may occur.

当有一个足够少的群集(数目标准)时，人们总是可以决定停止聚合。有些联系还可能保证集群之间的距离大于以前的集群，然后当集群之间的距离太远而无法合并时，就可以停止集群。然而，也有例外，如在质心链接的情况下，所谓的逆转(反转，偏离超节拍)就可能发生。

Divisive clustering分裂聚类

The basic principle of divisive clustering was published as the DIANA (DIvisive ANAlysis Clustering) algorithm. Initially, all data is in the same cluster, and the largest cluster is split until every object is separate.

The basic principle of divisive clustering was published as the DIANA (DIvisive ANAlysis Clustering) algorithm. Initially, all data is in the same cluster, and the largest cluster is split until every object is separate.

分裂聚类的基本原理被公布为 DIANA (分裂分析聚类)算法。最初，所有数据都位于同一个集群中，然后最大的集群被拆分，依此类推，直到每个元素都是独立的。

Because there exist [math]\displaystyle{ O(2^n) }[/math] ways of splitting each cluster, heuristics are needed. DIANA chooses the object with the maximum average dissimilarity and then moves all objects to this cluster that are more similar to the new cluster than to the remainder.

Because there exist [math]\displaystyle{ O(2^n) }[/math] ways of splitting each cluster, heuristics are needed. DIANA chooses the object with the maximum average dissimilarity and then moves all objects to this cluster that are more similar to the new cluster than to the remainder.

因为存在拆分每个集群的步骤，所以需要探索试算法。DIANA 选择平均差异最大的对象，然后将所有与新集群相似的对象移动到这个集群中取代移动到其余的对象的方法。

Software 软件

Open source implementations 开源工具

Hierarchical clustering dendrogram of the Iris dataset (using R). Source

Hierarchical clustering [[dendrogram of the Iris dataset (using R). Source ]]

层次聚类[[虹膜数据集的树状图(使用 r)]。[ https://cran.r-project.org/web/packages/dendextend/vignettes/cluster_analysis.html 来源]

Hierarchical clustering and interactive dendrogram visualization in Orange data mining suite.

Orange data mining suite.]]

橙色数据挖掘套件]

• ALGLIB implements several hierarchical clustering algorithms (single-link, complete-link, Ward) in C++ and C# with O(n²) memory and O(n³) run time.
• ALGLIB在C++ 和 C# 上以O(n²) 的内存和O(n³)的运行时间实现了几个层次聚类算法（单链接，完整链接，均值）。
• ELKI includes multiple hierarchical clustering algorithms, various linkage strategies and also includes the efficient SLINK, CLINK and Anderberg algorithms, flexible cluster extraction from dendrograms and various other cluster analysis algorithms.
• ELKI包括多种层次聚类算法，各种链接策略，同时包括高效运行， CLINK 安德伯格算法，从树状图和其他各种聚类分析算法中进行灵活的聚类提取。
• Octave, the GNU analog to MATLAB implements hierarchical clustering in function "linkage".
• Octave，与MATLAB类似的GNU在“联动”功能中实现了分层聚类。
• Orange, a data mining software suite, includes hierarchical clustering with interactive dendrogram visualisation.
• Orange,一个数据挖掘软件套件，包括层次聚类和交互式可视化树形图。
• R has many packages that provide functions for hierarchical clustering.
• R 有许多提供分层聚类功能的工具包。
• SciPy implements hierarchical clustering in Python, including the efficient SLINK algorithm.
• SciPy在python中实现分层聚类，包括高效的slink算法。
• scikit-learn also implements hierarchical clustering in Python.
• scikit-learn还实现了Python中的层次聚类。
• Weka includes hierarchical cluster analysis.
• Weka 包括层次聚类分析。

Commercial implementations 商业实践

• MATLAB includes hierarchical cluster analysis.
• MATLAB 包括层次聚类分析。
• SAS includes hierarchical cluster analysis in PROC CLUSTER.
• SAS包括在群聚程序中进行层次聚类分析。
• Mathematica includes a Hierarchical Clustering Package.
• Mathematica 包括一组层次聚类分析工具包。
• NCSS includes hierarchical cluster analysis.
• NCSS 包括层次聚类分析。
• SPSS includes hierarchical cluster analysis.
• SPSS包括层次聚类分析。
• Qlucore Omics Explorer includes hierarchical cluster analysis.
• Qlucore包括层次聚类分析的Omits 资源管理器。
• Stata includes hierarchical cluster analysis.
• Stata 包括层次聚类分析。
• CrimeStat includes a nearest neighbor hierarchical cluster algorithm with a graphical output for a Geographic Information System.
• CrimeStat包括一个能够为地理位置提供图形输出的最近邻层次聚类算法。

See also又及

• Binary space partitioning

二进制空间划分

• Bounding volume hierarchy

层次包围盒

• Brown clustering

布朗群集

• Cladistics

遗传分类学

• Cluster analysis

聚类分析

• Computational phylogenetics

计算系统发生学

• CURE data clustering algorithm

cure数据聚类算法

• Dasgupta's objective

达斯古塔的目标

• Dendrogram

系统树图

• Determining the number of clusters in a data set

确定数据集中的簇数

• Hierarchical clustering of networks

网络的层次聚类

• Locality-sensitive hashing

局部敏感哈希(LSH)方法

• Nearest neighbor search

最近邻搜索

• Nearest-neighbor chain algorithm

最近邻链算法

• Numerical taxonomy

数值分类法

• OPTICS algorithm

OPTICS算法

• Statistical distance

统计距离

• Persistent homology

持续同调

Further reading 延伸阅读

• Kaufman, L.; Rousseeuw, P.J. (1990). Finding Groups in Data: An Introduction to Cluster Analysis (1 ed.). New York: John Wiley. ISBN 0-471-87876-6. https://archive.org/details/findinggroupsind00kauf. 

• Hastie, Trevor; Tibshirani, Robert; Friedman, Jerome (2009). "14.3.12 Hierarchical clustering". The Elements of Statistical Learning (2nd ed.). New York: Springer. pp. 520–528. ISBN 978-0-387-84857-0. Archived from the original on 2009-11-10. http://www-stat.stanford.edu/~tibs/ElemStatLearn/. Retrieved 2009-10-20. 

Category:Network analysis

分类: 网络分析

Category:Cluster analysis algorithms

类别: 数据聚类算法

This page was moved from wikipedia:en:Hierarchical clustering. Its edit history can be viewed at 层次聚类/edithistory