526
个编辑
更改
无编辑摘要
The robot was cybernetic. It did not use a computer. Its control circuitry consisted of dozens of transistors controlling analog voltages. It used photocell optics and sonar to navigate. The 2N404 transistors were used to create NOR logic gates that implemented the Boolean logic to tell it what to do when a specific sensor was activated. The 2N404 transistors were also used to create timing gates to tell it how long to do something. 2N1040 Power transistors were used to control the power to the motion treads, the boom, and the charging mechanism.
The robot was cybernetic. It did not use a computer. Its control circuitry consisted of dozens of transistors controlling analog voltages. It used photocell optics and sonar to navigate. The 2N404 transistors were used to create NOR logic gates that implemented the Boolean logic to tell it what to do when a specific sensor was activated. The 2N404 transistors were also used to create timing gates to tell it how long to do something. 2N1040 Power transistors were used to control the power to the motion treads, the boom, and the charging mechanism.
这个机器人是自动化的，不需要人类通过电脑控制。它的控制电路由几十个控制模拟电压的晶体管组成并且它使用光电池光学和声纳导航。用来创建 NOR 逻辑门的是2N404晶体管，逻辑门执行<font color="#ff8000"> 布尔逻辑Boolean logic</font>布尔逻辑，当一个特定的传感器被激活时它就对机器人发出相应的指令。同时该晶体管也被用来制造计时门以告诉它做某件事需要多长时间以及控制电源的运动踏板，轰鸣和充电机制。
The original sensors in Mod I were physical touch only. The wall socket was detected by physical switches on the arm that followed the wall. Once detected, two electrical prongs were extended until they entered the wall socket and made the electrical connection to charge the vehicle. The stairway, doors, and pipes on the hall wall were also detected by physical switches and recognized by appropriate logic.
The original sensors in Mod I were physical touch only. The wall socket was detected by physical switches on the arm that followed the wall. Once detected, two electrical prongs were extended until they entered the wall socket and made the electrical connection to charge the vehicle. The stairway, doors, and pipes on the hall wall were also detected by physical switches and recognized by appropriate logic.
在 Mod I中最初的传感器只是物理接触。墙上的插座是通过跟在墙上的手臂上的物理开关检测到的。一旦检测到，两个电子插头便会延长，直到他们进入墙壁插座，并建立电气连接来给机器人充电。大厅墙上的楼梯、门和管道也能被物理开关检测到，并被合适的逻辑识别出来。
在 Mod I中最初的传感器只是物理接触。墙上的插座是通过连接在墙上的手臂上的物理开关检测到的。一旦检测到信号，两个电子插头便会延长，直到它们进入墙壁插座，并建立电气连接来给机器人充电。大厅墙上的楼梯、门和管道也能被物理开关检测到，并被合适的逻辑识别出来。
The sonar guidance system was developed for Mod I and improved for Mod II. It used two ultrasonic transducers to determine distance, location within the halls, and obstructions in its path. This provided "The Beast" with bat-like guidance. At this point, it could detect obstructions in the hallway, such as people in the hallway. Once an obstruction was detected, the Beast would slow down and then decide whether to stop or divert around the obstruction. It could also ultrasonically recognize the stairway and doorways to take appropriate action.
The sonar guidance system was developed for Mod I and improved for Mod II. It used two ultrasonic transducers to determine distance, location within the halls, and obstructions in its path. This provided "The Beast" with bat-like guidance. At this point, it could detect obstructions in the hallway, such as people in the hallway. Once an obstruction was detected, the Beast would slow down and then decide whether to stop or divert around the obstruction. It could also ultrasonically recognize the stairway and doorways to take appropriate action.
声纳制导系统是为 Mod I研制的，并为 Mod II 进行了改进。它使用了两个超声换能器来确定距离、大厅内的位置以及路径上的障碍物。这为“野兽”提供了蝙蝠般的指导。在这一点上，它可以探测到走廊上的障碍物，比如走廊上的人。一旦发现障碍物，野兽就会减速，然后决定是停下来还是绕过障碍物。它也可以通过超声波识别楼梯和门道来采取适当的行动。
声纳制导系统是为 Mod I研制的，后来为 Mod II 进行了改进。它使用两个超声换能器来确定距离、大厅内的位置以及路径上的障碍物。这为“野兽”提供了如蝙蝠的指导，以探测到走廊上的障碍物，如走廊上的人等。一旦检测到障碍物，野兽就会减速，然后决定是停止行进还是绕过障碍物。它也可以通过超声波识别楼梯和门道来采取适当的行动。